More than 100 kinds of stones, including bluestone, pebbles, quartz, marble, dolomite, sandstone, granite, etc., can be processed into sand. Mature technology allows it to better replace natural sand and be used in roads, railways, municipal engineering, water conservancy and hydropower. It is a promising investment project.

VSI series sand making machines, vertical shaft sand making machines, third-generation sand making machines, etc. are all common sand making equipment for us. Today, this article is about a roller-to-roller sand making machine with a cheaper sand making cost, also known as a roller crusher. The particle size of the feed does not exceed 30mm, and the fineness of the discharge is between 2~10mm, which can be satisfied for all kinds of coarse, medium and fine sand.100 tons per hour is the output that users consult more, and this article will introduce it in detail for you.

1. Which model is suitable for the 100-ton-per-hour roller sand making machine?

Generally, 2PG1560 pairs of roller sand making machines are recommended for users. The standard output is 60~110 tons. For different materials and discharge standards, the output will be affected to a certain extent, and it will fluctuate slightly, but for most materials, it is no problem to achieve 100 tons per hour.

In addition, the roller diameter of this type of equipment isФ1500mm, the roller width is 600mm, the feed particle size is ≤30mm, and the discharge port range is 2~10mm. It is equipped with the power model Y315L-6, the motor power is 110×2KW, and the total weight is 39.3T. Understanding these parameters is more helpful for your selection.

However, the range of user choices is not limited to this one. Manufacturers can make scientific configurations according to your actual budget investment, site size, product specifications, etc. In addition to the above-mentioned single equipment, you can also choose a combination of two small models.

2. How much is it about to invest in a roller sand making machine with a hourly output of 100 tons?

The price of equipment always affects the hearts of customers. Wanting to buy a cost-effective equipment is what every user thinks. Since the roller sand making machine with a hourly output of 100 tons has a variety of configurations, the high configuration is more expensive, and the low configuration is more economical. It is important to choose the appropriate configuration on the basis of meeting customer needs.Therefore, it is necessary to combine your budget, ore nature, discharge fineness, energy consumption, etc. to recommend a suitable roller sand making machine for you, and then give a detailed quotation.

If you are interested in sand making, or if you still have some questions, please feel free to consult customer service online and we will answer them for you for free.