The new type of jaw crusher is a common crushing equipment, mainly used in construction, chemical industry, metallurgy, cement and other industries.The flywheel is one of its main components and plays an important role in the operation process.For one reason or another, the flywheel will fail.So next, Xingkuang Group will take you to understand the cause and treatment method of the flywheel failure of the new jaw crusher for your reference.：

Cause of failure：

The eccentric shaft tie rod device of the jaw crusher is damaged, causing the bracket to lose support.After the tie rod spring fails, the bracket slides out of the tie rod support block.The bracket of the jaw crusher is broken due to the large working load, and the particle size of the discharge cannot be adjusted.The main engine of the jaw crusher stopped.

Treatment method：

Check the connection button of the flywheel.If it is loose or damaged, it should be repaired in time to ensure the synchronous operation of the wheels and eccentric shafts, as well as the normal operation of the crushing equipment.Jaw crusher equipment is a kind of crusher that works intermittently, so its energy load is unbalanced.A flywheel device is installed at one end of the eccentric shaft of the jaw crusher.The flywheel has a good static balance function in the jaw crusher, and it can also convert energy storage into flywheel operation to drive the eccentric shaft operation.However, there may also be some problems with the flywheel, or the equipment components related to the flywheel may not work properly.

Regarding the cause and treatment method of the flywheel failure of the above-mentioned new jaw crusher, I will take you to understand here. If you have any questions, you can leave a message online if you want to know or want to buy a crusher.

I hope the above sharing will be of help to everyone. Friends who want to know about the crusher in the future can pay attention.