The issue that material moisture and finished product particle size will affect the production efficiency of the crusher has been widely circulated, but little is known about temperature changes.When the crusher is working, the temperature will have a significant impact on the crusher. How to reduce this impact?

1. The effect of low temperature on the crusher

In winter, the low temperature will greatly reduce the service life of the crusher, and even the oil and water in the crusher will freeze, affecting the operation of the equipment.

2. The effect of high temperature on the crusher

In the case of high temperature, the temperature of the crusher itself will increase, which is prone to unpredictable situations, such as sudden shutdown, spindle fracture and other failures. Due to thermal expansion and contraction, high temperature will cause some parts of the crusher to expand, causing friction and deterioration at the bite of the parts to become larger, causing the temperature to rise again. High temperature will also cause the temperature of the lubricating oil to increase, the lubrication effect and the carrying capacity between the parts of the crusher to decrease, and even cause carbonization of the lubricating oil.

solution

When it is high temperature, do a good job of daily maintenance of the equipment, check the equipment regularly, and check the value of the thermometer frequently when working, and stop for inspection immediately if you find a problem.If the reason cannot be found for a while, the crusher must not be allowed to continue working.Due to the high temperature and dry air in summer, the dust problem is more serious, so it is necessary to clean up the oil and dust on the equipment in time, maintain good heat dissipation, and avoid a large amount of dust or mineral sand entering the body, causing significant economic losses.

At low temperatures, the operator should regularly charge the battery of the crusher and maintain the preheating device.Antifreeze for winter antifreeze, summer antifreeze, and anticorrosive should be selected for the crusher.Regular inspections to ensure the normal use of all parts of the equipment.