During the long-term use of the crusher, it is inevitable that various problems such as overtemperature, vibration, shutdown, and wear will occur, which will lead to a decrease in the efficiency of the crusher, affect normal production, and fail to achieve the expected processing effect. Therefore, in order to maximize the service life of the crusher and achieve stable operation of the crusher, we must master some basic knowledge.
First: Temperature control
During the operation of the crusher, the temperature of each component has a normal range. In the case of too low or too high temperature, there may be unpredictable dangers. First, it is necessary to prevent load operation at low temperatures. During the low-speed preheating stage of the equipment, it is necessary to ensure its normal operation. It can only work when the specified normal temperature is reached. Second, it is necessary to prevent operation at high temperatures. The temperature of the crusher is easily increased after long-term use. It is necessary to regularly check each temperature gauge. If a problem is found, the machine should be stopped immediately to check the cause and repair it to maintain reasonable heat dissipation of the equipment.
Second: Reduction of corrosion
If the quality of the parts is too poor or the production environment is relatively bad, the crusher will easily corrode, which will increase machine failures. This corrosion is very harmful to the crusher. Therefore, the operator should take appropriate protective measures according to the geographical location and natural conditions of the production site to prevent rainwater from invading the machine and reduce the impact of corrosion on the crusher.
In order to keep your crusher in good working condition, reduce the failure rate, increase production and work efficiency, and extend its service life, we must do a good job in the daily maintenance of the crusher to prevent the crusher from "strike". Yingkuang Machinery has many types of crushers with reliable quality.
