As a common coarse crushing equipment in sand and gravel production lines, the 69 jaw crusher (PE-600×900) is favored by the market due to its moderate processing capacity and economy. This article will focus on analyzing its production capacity performance and current market price.

1. 69 jaw crusher output analysis
The model is named after the feed port size of 600×900mm, and the maximum allowable feed particle size is 500mm. Under standard working conditions, its theoretical output range is 50-180 tons/hour, and the actual output is affected by three key factors:
Material characteristics: When processing high-hardness ores such as granite and basalt, the output may drop to about 100 tons/hour; while when crushing medium-hard materials such as limestone, the upper limit can reach 160 tons
Discharge opening adjustment: In the adjustable range of 65-160mm, the larger the opening, the higher the output, but the finished product particle size will increase accordingly
Equipment status: The configuration difference of motor power 55-75kW will cause a 10%-15% fluctuation in production capacity

2. Overview of the market price of 69 jaw crusher
The current international market quotation shows obvious stratification:
Basic model: The standard model provided by Chinese manufacturers is about 15,000-25,000 US dollars, including a 55kW motor and a mechanical adjustment device
Upgraded model: Models equipped with hydraulic adjustment and wear-resistant composite jaw plates can reach 30,000-38,000 US dollars, and the life span is extended by 30%

3. Application suggestions for 69 jaw crusher
For medium-sized sand and gravel plants with an output of about 100 tons per hour, the 69 jaw crusher and PF1214 impact crusher can form the most cost-effective crushing system. If the raw material contains more abrasive components, it is recommended to choose the version equipped with manganese steel jaw plates. Although the initial cost increases by about US$2,000, it can reduce the ton consumption cost by more than 30%.