PCH0404 hammer crusher is a small mining equipment dedicated to crushing medium-hard and brittle materials. Its name comes from the rotor size of 400×400mm.The following is a detailed technical characteristics and application analysis：

1. Core parameters and structure

    Basic specifications

    Rotor size: Diameter×length=400×400mm

    Inlet size: width 310mm×length 440mm, maximum feed particle size≤200mm

    Discharge particle size: controlled by adjusting the gap between the two strips, the range is ≤30mm

    Processing capacity: 16-25 tons/hour (hourly production)

    Drive and energy consumption

    Standard motor power: 11kW

    Crushing form: support dry and wet dual-mode operation

    2. Design characteristics and application scenarios

    Structural advantages: The principle of impact crushing with a hammer head is adopted, which has the advantages of hammer breaking and counterattack breaking, and has the characteristics of stable operation, less dust, low noise, and convenient maintenance.

    Applicable materials：

    Mainly crushing coal, coal gangue, gypsum, limestone and other high-calcium stone materials

    Brittle minerals with compressive strength ≤100MPa and moisture content <15%

    Industry application: secondary crushing or final crushing links in cement, building materials, thermal power generation, metallurgy and other fields.