In the field of sand and gravel processing, the hourly production of 50 tons belongs to the configuration of small and medium-sized production lines, 

and the selection of equipment needs to take into account efficiency and economy.

This article will systematically sort out the five types of crusher models and typical application scenarios adapted to this production capacity for you.

1. Jaw crusher (the first choice for coarse crushing)

    PE-400×600 type

    Feed particle size: ≤400mm

    Processing capacity: 40-60t/h

    Motor power: 30-37kW

    Applicable scenarios: Coarse crushing of medium hardness materials such as limestone and granite

2. Impact crusher (medium and fine crushing and shaping)

    PF-1007 type

    Maximum feed: ≤350mm

    Finished product particle size: ≤30mm

    Advantages: The finished product has excellent particle size and high cube content

3. Hammer crusher (one-time molding)

    PCZ0706 heavy hammer break

    Rotor diameter: 700mm

    Production capacity: 50-80t/h

    Features: Single-stage crushing, energy consumption is reduced by 30%

4. cone crusher (special for high hardness materials)

    CS160 standard type

    Applicable materials: basalt, quartz stone

    Crushing principle: Laminated crushing

    Production capacity: 55-75t/h

    5. Mobile crushing station (flexible configuration)

    Host configuration: CJ96 jaw break + PF-1007 counterattack break

    Transition time: ≤2 hours

    Applicable scenarios: construction waste recycling, temporary gravel field

Selection suggestions：

    Soft materials (such as limestone) give priority to the combination of hammer breaking + counterattack breaking, and the investment cost is reduced by 40%

    Jaw breaking + cone breaking scheme is recommended for hard rock processing, and the life of wear-resistant parts is extended by 50%