The PC1010 hammer crusher is a highly efficient crushing equipment widely used in the mining, building materials, and chemical industries. The "1010" in its model number typically indicates a rotor diameter and length of approximately 1000 mm. This compact machine mainly consists of a frame, rotor, hammers, screen plate, and drive unit. It relies on the high-speed rotating hammers to impact, shear, and grind materials, thus achieving the crushing purpose.

Regarding technical parameters, the PC1010's feed particle size is generally controlled within 300 mm, with the specific value depending on the material hardness. Its discharge particle size can be flexibly controlled by adjusting the screen plate gap, typically below 25 mm, meeting various production needs. The processing capacity is greatly affected by the material properties, with an hourly output typically between 40 and 80 tons. The matching motor power is generally in the range of 75 kW to 90 kW, ensuring strong power output and stable operating efficiency.

This model has a wide range of applications. In limestone production lines, it is commonly used for primary or secondary crushing, processing large stones into building aggregates; in cement manufacturing, it is used to crush raw materials and clinker; in addition, it performs excellently in coal gangue power generation, gypsum processing, and construction waste recycling. Due to its simple structure, convenient maintenance, and relatively low energy consumption, the PC1010 has become a core piece of equipment in many small and medium-sized crushing production lines, providing strong support for the efficient utilization of resources.