1. Model parameter positioning

The standard configuration of the 1315 impact crusher (PF-1315) includes a rotor with a specification of Φ1320×1500mm, a maximum feed size of ≤350mm, and is suitable for a motor power of 200-250kW. This model is widely used in the field of medium-hard material (compressive strength ≤350MPa) medium crushing processing.

2. Standard production range, for example, in the granite processing scenario:

Coarse crushing feed (≤500mm) hourly output: 90-130 tons

Medium crushing processing (≤350mm) hourly output: 120-180 tons

Fine crushing closed-loop cycle working condition hourly output: 150-220 tons

3. Typical application comparison

In the limestone production line, PF-1315 can achieve a stable output of 180-240t/h with a vibrating screen, which is about 40% more energy efficient than the same specification jaw crusher. Actual cases show that a basalt aggregate project has achieved a peak output of 280 tons per hour by optimizing the rotor linear speed (28-32m/s) and the impact plate angle.

4. Selection suggestions: select supporting solutions based on the characteristics of raw materials:

Highly abrasive materials: dual motor drive + chromium-molybdenum alloy hammer

Fine crushing: hydraulic cover opening device + three-stage impact chamber

Wet and sticky material processing: heating anti-blocking system