1. Looseness inside the machine
The hammer crusher will be subjected to huge forces during operation, which may cause the internal parts of the machine to loosen, thus affecting its normal operation. For example, when the fixing bushing used to fix the eccentric shaft is loose, the eccentric shaft may get stuck in the machine, causing the equipment to be unable to continue to operate.
Solution:
Regularly check whether the various parts of the machine are loose, and tighten them in time.
2. Improper tightness of the transmission belt
The hammer crusher relies on the transmission belt to transmit power. If the tightness of the belt is improper, it will affect the normal operation of the equipment. If the belt is too loose, the equipment may not work due to lack of power; if the belt is too tight, it is easy to break, which will also affect the operation of the equipment.
Solution:
Before starting the machine each time, check whether the tightness of the transmission belt is appropriate and make necessary adjustments.
3. Blockage of the feed port
During the production process, if workers continue to add ore raw materials to the feed port in order to meet the deadline, the feed port may be blocked. Once the feed port is blocked, the equipment will not be able to continue to operate until the feed port is cleaned up before production can be resumed.
Solution:
During the production process, raw materials should be added evenly to avoid clogging of the feed port.
Once clogging occurs, the equipment should be stopped immediately and the feed port should be cleaned.
In summary, the reasons for the sudden shutdown of the hammer crusher may include looseness inside the machine, improper tightness of the drive belt, and clogging of the feed port. In order to avoid these problems, the equipment should be checked and maintained regularly to ensure that all components are in good condition. At the same time, during the production process, attention should be paid to operating specifications to avoid problems such as clogging of the feed port.
