In the field of sand and gravel aggregate processing and mining crushing, jaw crusher is the core equipment in the coarse crushing link, and its selection directly determines the efficiency and cost control of the production line. In view of the demand for 60 tons of output per hour, combined with the technical parameters of mainstream equipment in the industry, the following three jaw crusher models that meet the production capacity requirements are recommended:

I. Recommendation of mainstream models

a. JC90 European version jaw crusher

Technical features

As a representative of the European version, its double wedge adjustment device can quickly adjust the discharge particle size (adjustment range 60-150mm), and is equipped with a hydraulic lubrication system to achieve intelligent operation and maintenance. By increasing the bearing specifications and optimizing the power transmission structure, the continuous operation stability of the equipment is significantly improved.

Productivity performance

The rated output is 55-100 tons/hour, and the eccentric shaft speed can be adjusted to accurately adapt to the production capacity demand of 60 tons/hour.

b. PE-400×600 Classic Jaw Crusher

Economic Advantages‌

The design of the feed port of 400×600mm can process ore raw materials below 350mm. The deep cavity structure and reasonable stroke can achieve a flexible output of 16-64 tons/hour under low energy consumption (motor power 30kW), with outstanding cost performance.

Applicable Scenarios‌

Suitable for small and medium-sized quarries with limited budgets, especially for coarse crushing of medium-hard materials such as limestone and shale.

c. PEX-250×1200 Fine Jaw Crusher

Differentiation Positioning‌

As a fine crushing machine, it adopts a shallow cavity fine tooth plate design, which can crush the material to a uniform particle size of 20-60mm. The characteristics of 20-61 tons per hour are suitable as a secondary crushing equipment or the main machine of a small production line.

Energy-saving Performance‌

The whole machine weighs only 9.7 tons, equipped with a 22kW motor, and the energy consumption per ton is 15%-20% lower than that of traditional models.

2. Comparison of key indicators for selection

3. Application suggestions

Material property matching‌

JC90 is suitable for high-hardness rock crushing, and PE-400×600 is more suitable for economical solutions for medium-hard materials.

Capacity elasticity requirements‌

If you need to reserve space for expansion, it is recommended to choose JC90 (maximum capacity 100 tons/hour); PEX-250×1200 can be selected for fixed capacity scenarios.

Particle size control requirements‌

For fine crushing requirements, PEX-250×1200 is preferred, and PE-400×600 is recommended for coarse crushing scenarios.