What are the models of impact sand making equipment with 40mm feed?

Model HXVSI-8518: This model is mainly for the feed size of soft materials. The equipment feed is divided into two forms, waterfall and center feed, with a processing capacity of 200-260t/h, and the full center feed output is 100-130t/h, feed particle size (soft material 40mm, hard material 35mm), operating speed reaches 1520-1690r/min, dual motor power 4P 180KW, total equipment weight 14.5 tons, dual oil slurry supply, more stable operation.

Model HXVSI-9526: Same as the previous model, the equipment feed is divided into two forms, waterfall and center feed, with a processing capacity of 300-380t/h, and the full center feed output is 150-190t/h, feed particle size (soft material 45mm, hard material 40mm), operating speed reaches 1360-1510r/min, dual motor power 4P 264KW, total equipment weight 17.8 tons.

Advantages of impact machine-made sand equipment:

1. Deep cavity crushing, 30% increase in output

The deep cavity rotor design is adopted, the material throughput is large, and the output is increased by about 30% compared with the traditional crushing of the same power.

2. Uniform particle size, in line with national sand and gravel use standards

The finished product produced by the impact machine-made sand equipment has uniform particle size, continuous grading, cubic particle shape, rough and angular surface, which is conducive to the bonding of mixed cement and sand and gravel aggregates, and is within the national sand and gravel standard II area.

3. Dual oil slurry supply, energy saving and consumption reduction

Dual oil slurry interchangeable oil supply, automatic shutdown when there is no oil pressure or oil temperature, reducing power consumption, self-heating of the motor in winter, and improving work efficiency.